user manual Firmware: V1.1

Parameter Function
‘Tilt Limit’ Starting point of the inclination angle
Use [UP] or [DOWN] to select the option ‘Starting Point’ . Conrm with
[ENTER].
Use [UP] or [DOWN] to select a value from 0 to 189.
Ending point of the inclination angle
Use [UP] or [DOWN] to select the option ‘Ending Point’ . Conrm with
[ENTER].
Use [UP] or [DOWN] to select a value from 1 to 190.
‘Display Rev’ Display reversal
Use [UP] or [DOWN] to select the option ‘YES’ (text in the display
appears upside down) or ‘NO’ (text in the display appears normal).
‘Sensitivity’ Microphone sensitivity
Use [UP] or [DOWN] to select a value from 0 (sound control o) to 100
(microphone sensitivity high).
‘Dmx Fail’ Behaviour on DMX control failure
Use [UP] or [DOWN] to select the option ‘OFF’ (blackout in case of
DMX failure) or ‘HOLD’ (last DMX signal is being held).
Operating
Hero Wash 715 HEX LED Hero Wash 715 HEX LED WH
35
Moving Head