User manual

Parameter Function
‘White’ Sets the initial intensity for white.
‘Amber’ Sets the initial intensity for amber.
‘UV’ Sets the initial intensity for UV light.
When the display shows the desired parameter conrm the setting with [ENTER]. Use [UP] or
[DOWN] to select the desired value for the selected parameter (0 … 120 for pan and tilt,
0 … 255 for red, green, blue, white, amber and UV light) and conrm the setting with [ENTER].
To exit the menu item without making changes, press [MENU].
Use the ‘System Info’ menu to call up information about the system.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
‘System Info’ . Conrm the selection with [ENTER].
The display shows the current software version, the current operating mode and the DMX start
address.
System information
Operating
42
Hero Wash 715 HEX LED Hero Wash 715 HEX LED WH
Moving Head