User manual

7.2 Main menu

Press [ENTER] to activate the main menu.

Use [UP] and [DOWN] to change the respectively indicated value. When the display shows the

desired value press [ENTER].

To exit the menu item without making changes, press [MENU].

If you don't press any button for 35 seconds the display turns o. Then press [MENU], [ENTER],

[UP] or [DOWN] briey to turn it on again.

All previous settings are retained even when you switch the device o and disconnect it from

the mains.

Use the ‘DMX Address’ menu to set the DMX address.

Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows ‘DMX

Address’ . Conrm the selection with [ENTER] and use [UP] or [DOWN] to select a value between

1 and 512 to set the desired DMX address.

When the display shows the desired value conrm the setting with [ENTER]. To exit the menu

item without making changes, press [MENU].

Make sure that this number matches the conguration of your DMX controller.

DMX address

Operating

Hero Wash 715 HEX LED Hero Wash 715 HEX LED WH

Moving Head