User manual

Parameter Function
‘White’ Sets the initial intensity for white.
‘Zoom’ Sets the output setting for the zoom.
When the display shows the desired parameter conrm the setting with [ENTER]. Use [UP] or
[DOWN] to select the desired value for the selected parameter (0 … 120 for Pan and Tilt,
0 … 255 for Red, Green, Blue, White and Zoom) and conrm the setting with [ENTER]. To exit
the menu item without making changes, press [MENU].
Use the ‘System Info’ menu to call up information about the system.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
‘System Info’ . Conrm the selection with [ENTER].
The display shows the current software version, the current operating mode and the DMX start
address.
System information
Operating
Hero Wash 712 Z RGBW Zoom Hero Wash 712 Z WH RGBW Zoom
41
Moving Head