user manual Firmware: V1.1

Parameter Function
‘Calibration’ Calibrating
Detailed information about this menu item can be found under
Ä ‘Calibrating’ on page 38.
‘Factory Reset’ Reset to factory defaults
Use [UP] or [DOWN] to select the option ‘YES’ (factory reset) or ‘NO’
(no factory reset).
‘Reset Motor’ Resetting the motor
When the display shows the desired value, conrm the selection with [ENTER]. To exit the
menu item without making changes, press [MENU].
Operating
Hero Wash 340FX RGBW Zoom
37
Moving Head