user manual Firmware: V1.1

7.2 Main menu

Press [ENTER] to activate the main menu.

Use [UP] and [DOWN] to change the respectively displayed value. When the display shows the

desired value, press [ENTER].

To exit the menu item without making changes, press [MENU].

If you don't press any button for 30 seconds the display turns o. A short press on [MENU],

[ENTER], [UP] or [DOWN] will then turn it back on.

All previous settings are retained even when you switch the device o and disconnect it from

the mains.

Use the ‘DMX Address’ menu to set the DMX address.

Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows ‘DMX

Address’ . Conrm the value with [ENTER] and use [UP] or [DOWN] to select a value between 1

and 512 for setting the desired DMX address.

When the display shows the desired value, conrm the selection with [ENTER]. To exit the

menu item without making changes, press [MENU].

Make sure that this number matches the conguration of your DMX controller.

DMX address

Operating

Hero Wash 340FX RGBW Zoom

Moving Head