User manual

Use the ‘Calibration’ menu to adjust the start parameters of the device.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
‘Settings’ . Conrm the value with [ENTER] and use [UP] or [DOWN] to select the submenu
‘Calibration’ .
Conrm the value with [ENTER]. The device prompts you to enter a password. Press [UP] or
[DOWN] repeatedly until the display shows ‘018’ and conrm the selection with [ENTER].
Use [UP] or [DOWN] to select the desired parameter to set.
Parameter Function
‘All To Origin’ Resets all parameters of the calibration to factory settings.
‘Pan’ Sets the home position of the rotation.
‘Tilt’ Sets the home position of the inclination movement.
‘Red ’ Sets the initial intensity for red.
‘Green’ Sets the initial intensity for green.
‘Blue’ Sets the initial intensity for blue.
Calibrating
Operating
40
Hero Wash 340FX RGBW Zoom
moving head