user manual Firmware: V1.1

Use the ‘Calibration’ menu to adjust the start parameters of the device.

Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows

‘Settings’ . Conrm the value with [ENTER] and use [UP] or [DOWN] to select the submenu

‘Calibration’ .

Conrm the value with [ENTER]. The device prompts you to enter a password. Press [UP] or

[DOWN] repeatedly until the display shows ‘018’ and conrm the selection with [ENTER].

Use [UP] or [DOWN] to select the desired parameter to set.

Parameter Function

‘All To Origin’ Resets all parameters of the calibration to factory settings.

‘Pan’ Sets the home position of the rotation.

‘Tilt’ Sets the home position of the inclination movement.

‘Spot Color’ Sets the initial colour of the spot.

‘Gobo’ Sets the rst gobo.

‘Focus’ Sets the default setting of the light bundling.

‘Prism’ Adjusts the prism.

When the display shows the desired parameter, conrm the selection with [ENTER]. Use [UP] or

[DOWN] to select the desired value for the selected parameter (0 … 120) and conrm the selec‐

tion with [ENTER]. To exit the menu item without making changes, press [MENU].

Calibrating

Operating

Hero Spot 60, Hero Spot 60 WH

Moving Head