user manual Firmware: V1.1

Parameter Function
‘Tilt Limit’ Starting point of the inclination angle
Use [UP] or [DOWN] to select the option ‘Starting Point’ . Conrm with
[ENTER].
Use [UP] or [DOWN] to select a value from 0 to 189.
Ending point of the inclination angle
Use [UP] or [DOWN] to select the option ‘Ending Point’ . Conrm with
[ENTER].
Use [UP] or [DOWN] to select a value from 1 to 190.
‘Display Rev’ Display reversal
Use [UP] or [DOWN] to select the option ‘YES’ (text in the display
appears upside down) or ‘NO’ (text in the display appears normal).
‘Sensitivity’ Microphone sensitivity
Use [UP] or [DOWN] to select a value from 0 (sound control o) to 100
(microphone sensitivity high).
‘Dmx Fail’ Behaviour on DMX control failure
Use [UP] or [DOWN] to select the option ‘OFF’ (blackout in case of
DMX failure) or ‘HOLD’ (last DMX signal is being held).
Operating
34
Hero Spot 60, Hero Spot 60 WH
Moving Head