user manual Firmware: V1.1

Use the ‘Running Mode’ menu to set the operating mode.

Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows

‘Running Mode’ . Conrm the value with [ENTER] and use [UP] or [DOWN] to select one of the

four operating modes ( ‘DMX’ , ‘Auto’ , ‘Sound’ , ‘Slave’ ).

Operating mode Function

‘DMX’ DMX control

In this mode the device is controlled via a DMX controller.

‘Auto’ Auto programmes

In this mode, the unit plays the preprogrammed shows.

‘Sound’ Sound control

In this mode, the unit follows the rhythm of the background music or

sounds detected by the built-in microphone.

‘Slave’ Slave function

In this mode, the device follows exactly the operation of the master

that it is connected to.

When the display shows the desired value, conrm the selection with [ENTER]. To exit the

menu item without making changes, press [MENU].

Operating mode

Operating

Hero Spot 60, Hero Spot 60 WH

Moving Head