user manual Firmware: V1.1

When the device and the DMX controller are operational, the DMX indicator in the display
shows that a DMX signal is being received on the input.
When you congure a group of devices in master/slave mode, the rst unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the rst slave device. Then connect the DMX output of the rst slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
22
Hero Spot 60, Hero Spot 60 WH
Moving Head