User manual

Use the ‘Calibration’ menu to adjust the start parameters of the device.

Press [Enter] to activate the main menu and use [Up] or [Down] until the display shows

‘Settings’ . Conrm the selection with [Enter] and use [Up] or [Down] to select the submenu

‘Calibration’ .

Conrm the selection with [Enter]. The device prompts you to enter a password. Successively

press [Up], [Down], [Up] and [Down] and conrm the selection with [Enter].

Use [Up] or [Down] to select the desired parameter you want to set.

Parameter Function

‘All To Origin’ Resets all parameters of the calibration to factory settings.

‘Pan’ Sets the home position of the rotation.

‘Tilt’ Sets the home position of the inclination movement.

‘ Color’ Sets the initial colour of the spot.

‘Gobo’ Sets the rst gobo.

‘Focus’ Sets the default setting of the light bundling.

‘Prism’ Adjusts the prism.

When the display shows the desired parameter conrm the selection with [Enter]. Use [Up] or

[Down] to select the desired value for the selected parameter between ‘0’ and ‘120’ and con‐

rm the setting with [Enter]. To exit the menu item without making changes, press [Menu].

Calibrating

Operating

Hero Scan 150

LED Scanner