User manual

Parameter Function
‘DMX fail’ Behaviour on DMX control failure
Use [Up] or [Down] to select ‘OFF’ (blackout in case of DMX failure) or
‘HOLD’ (last DMX signal is being held).
‘Calibration’ Calibrating
Detailed information about this menu item can be found under
Ä ‘Calibrating’ on page 31.
‘Factory Reset’ Reset to factory defaults
Use [Up] or [Down] to select ‘YES’ (factory reset) or ‘NO’ (no factory
reset).
‘Reset Motor’ Resetting the motor
When the display shows the desired value conrm the setting with [Enter]. To exit the menu
item without making changes, press [Menu].
Operating
30
Hero Scan 150
LED Scanner