User manual

7 Operating
7.1 Starting the device
CAUTION!
Risk of injury due to mirror movements
The mirror mounted at the device head may perform very fast movements (pan,
tilt) and reect very bright light. This is also the case immediately after switching
on the device, with automatic or remote operation, and while a connected DMX
controller is in o state. Persons who are in the immediate vicinity of the device
may be injured or frightened by this.
Make sure that there are no obstacles within the movement range of the mirror,
and that no persons are in the immediate vicinity of the device before switching it
on and during its operation. If any work is to be carried out within the movement
range or in the immediate vicinity of the mirror, the device must remain switched
o.
Connect the device to the power supply to start operation. After a few seconds, the fans start
to work, the mirror at the device head moves to the pan and tilt home positions and the dis‐
play indicates a system reset. The device is now operational.
Operating
24
Hero Scan 150
LED Scanner