User manual

5 Starting up

Create all connections while the device is o. Use the shortest possible high-quality cables for

all connections. Take care when running the cables to prevent tripping hazards.

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX

device. Connect the output of the rst DMX device to the input of the second one, and so on

to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain

is terminated with a resistor (110 Ω, ¼ W).

The white LED next to the display lights up when a signal is present at the DMX input.

Connections in DMX mode

DMX indicator

Starting up

Hero Scan 150

LED Scanner