User manual

In this mode, the unit follows the rhythm of the background music or sounds
detected by the built-in microphone.
1. Press [SET] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows ‘Running Mode’ and conrm with
[SET].
3. Press [UP] or [DOWN] until the display shows ‘Sound’ and conrm with [SET].
4. Press [UP] or [DOWN] to select the desired submenu or the desired value and
conrm with [SET].
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘Program’ ‘Program 1…
Program 8’
Sound controlled programme 1…8
‘Sensitivity’ ‘0’ … ‘100’ Microphone sensitivity from low to
high
ð
The device plays the selected show in an endless loop.
To use a device as the master device, select one of the automatic programmes, acti‐
vate the sound control or the manual control. Connect the slave devices to the DMX
output of the master device and select the DMX mode.
In the ‘Running Mode’ menu, you can make manual settings for the device parame‐
ters.
1. Press [SET] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘Running Mode’ and conrm with
[SET].
3. Use [UP] or [DOWN] to select the menu item ‘Manual Control’ and conrm with
[SET].
4. Use [UP] or [DOWN] to select the desired parameter and conrm with [SET].
The following sub menus are available:
Menu level 3 Menu level 4/5 Description
‘PAN’ ‘0’ … ‘540’ Setting the angle of rotation
‘TILT’ ‘0’ … ‘270’ Setting the angle of inclination
‘Pan/Tilt Speed’ ‘0’ … ‘255’ Setting the speed of pan and tilt,
increasing speed
‘TILT rotation’ ‘0’ … ‘255’ Setting endless rotation of Tilt,
decreasing speed
7.4 Settings
Use the ‘Setting’ menu to adjust the basic device parameters.
1. Press [SET] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘Setting’ and conrm with [SET].
Sound control
Master / slave mode
Manual operating on the unit
Operating
16
Hero Mirror
Moving Head