User manual

Mode Highest possible DMX address
4-channel mode 509
8-channel mode 505
7.3 Operating modes
Set the DMX mode in the ‘Running Mode’
menu.
1. Press [SET] to activate the main menu.
2. Use [UP] or [DOWN] until the display shows ‘Running Mode’ and conrm with
[SET].
3. Use [UP] or [DOWN] to select one of the two DMX modes (4-channel mode or 8-
channel mode, display shows ‘DMX 4CH Mode’ or ‘DMX 8CH Mode’ ) and con‐
rm with [SET].
ð
The device is now controlled by a DMX controller.
In this operating mode you select one of the automatic programmes and adjust the
running speed of the automatic programme.
1. Press [SET] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows ‘Running Mode’ and conrm with
[SET].
3. Press [UP] or [DOWN] until the display shows ‘Auto’ and conrm with [SET].
4. Press [UP] or [DOWN] to select the desired submenu or the desired value and
conrm with [SET].
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘Program’ ‘Program 1…
Program 8’
Automatic programme 1…8
‘Speed’ ‘0’ … ‘100’ Running speed from slow to fast
ð
The device plays the selected show in an endless loop.
DMX mode
Auto programmes
Operating
Hero Mirror
15
Moving Head