User manual

1. Press [SET] to activate the main menu.

2. Press [UP] or [DOWN] until the display shows ‘Setting’ and conrm the selec‐

tion with [SET].

3. Press [UP] or [DOWN] until the display shows ‘Home Position’ and conrm the

selection with [SET].

The device prompts you to enter a password.

Press [UP] or [DOWN] until the display shows ‘018’ and conrm the selec‐

tion with [SET].

4. Use [UP] or [DOWN] to select the parameter you want to set and conrm the

selection with [SET].

The following sub menus are available:

Menu level 3 Menu level 4 Description

‘Pan’ ‘–128’ … ‘127’ Setting the home position of the rotary

movement

‘Tilt’ ‘–128’ … ‘127’ Setting the home position of the inclina‐

tion movement

‘Pan/Tilt Speed’ ‘0’ … ‘255’ Setting the initial speed of pan and tilt,

increasing speed

‘Dimmer’ ‘0’ … ‘255’ Setting the initial dimmer intensity

‘Color’ ‘–128’ … ‘127’ Setting the initial colour of the colour

wheel (one of the 13 colours or white)

‘Fixed Gobo’ ‘–128’ … ‘127’ Setting the home position of the static

Gobo wheel (one of the 11 Gobos)

‘Frost’ ‘–128’ … ‘127’ Specifying the initial frost lter setting

‘7 color wheel’ ‘–128’ … ‘127’ Specifying the initial eect wheel setting

‘Focus’ ‘–128’ … ‘127’ Specifying the initial focus setting

‘Prism circular’ ‘–128’ … ‘127’ Specifying the initial circular prism setting

‘Prism linear’ ‘–128’ … ‘127’ Specifying the initial linear prism setting

Setting the start parameters

Operating

Hero Beam 100

moving head