User manual
Table Of Contents
Menu level 2 Menu level 3/4 Description
‘Exponential’ square curve with a at course at the
beginning and steep course at the
end
‘Logarithmic’ Inverted square curve with a steep
course at the beginning and a at
course at the end
‘S Curve’ Non-linear curve with a distinctive
at course at the beginning and end
‘Fan Mode’ Fan setting
‘Max’ maximum speed
‘Automatic’ temperature-dependent speed
‘Silent’ quiet mode with possible reduction
of light output
‘Blackout’ Blackout of the device
‘No’ Blackout o
‘If XY run’ Blackout if Pan or Tilt active
‘If color wheel
run’
Blackout if colour wheel active
‘If gobo wheel
run’
Blackout if Gobo wheel active
‘PWM’ Pulse-width modulation
Options: ‘650Hz’ , ‘1530Hz’ , ‘3600Hz’ , ‘12KHz’ or ‘25KHz’
‘Auto Correction’ Auto-correction Pan and Tilt
‘ON’ Auto-correction activated. The device
returns to its starting position if the
moving head is unintentionally
adjusted
‘OFF’ Auto-correction disabled (not recom‐
mended)
‘Display
Backlight’
Display illumination
‘ON’ Illumination permanently on
‘OFF’ Illumination is switched o after 60
seconds
‘Display Reverse’ Display reversal
‘ON’ Text in the display appears upside
down
‘OFF’ Text in the display appears normal
‘Autolock’ Key lock
Operating
22
Hero Beam 100
moving head