User manual

In this operating mode you select one of the automatic programmes and adjust the
speed and the overall brightness of the automatic programme.
1. Press [SET] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows ‘Running Mode’ and conrm the
selection with [SET].
3. Press [UP] or [DOWN] until the display shows ‘Auto’ and conrm the selection
with [SET].
4. Press [UP] or [DOWN] to select the desired submenu or the desired value and
conrm the selection with [SET].
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘Program’ ‘Program 1…
Program 8’
Automatic programme 1…8
‘Speed’ ‘0…100’ Running speed from slow to fast
‘Master
Brightness’
‘0…100%’ Overall brightness from dark to
bright
In this operating mode you select one of the sound controlled programmes and
adjust the microphone sensitivity and the overall brightness of the programme.
1. Press [SET] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows ‘Running Mode’ and conrm the
selection with [SET].
3. Press [UP] or [DOWN] until the display shows ‘Sound’ and conrm the selection
with [SET].
4. Press [UP] or [DOWN] to select the desired submenu or the desired value and
conrm the selection with [SET].
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘Program’ ‘Program 1…
Program 8’
Sound controlled programme 1…8
‘Sensitivity’ ‘0…100’ Microphone sensitivity from low to
high
‘Master
Brightness’
‘0…100%’ Overall brightness from dark to
bright
To use a device as the master device, select one of the automatic programmes, acti‐
vate the sound control or the manual control. Connect the slave devices to the DMX
output of the master device and select the DMX mode.
Auto programmes
Sound control
Master / slave mode
Operating
18
Hero Beam 100
moving head