User manual

6 Connections and controls
Beam 100
UP
DOWN
ESC
SET
DMX
RUN
100-240V~50/60Hz max. 12A
Load: 150W
4
5
PUSH
PUSH
) * + , -. /
$ &%ö
'(#
1 [DMX]
Status LED. The LED lights up as soon as a DMX signal is present.
2 [RUN]
Status LED. This LED lights up once the device is operational.
3 Display
4 [UP]
Increases the displayed value by one.
5 [SET]
Activates the main and settings menu. Selects an option of the respective operating mode, conrms the set value.
6 [DOWN]
Decreases the displayed value by one.
7 [ESC]
Closes an open submenu without saving any changes.
8 [DMX In]
DMX input, designed as XLR panel plug, 3-pin
9 [DMX Out]
DMX output, designed as XLR panel socket, 3-pin
10 [DMX In]
DMX input, designed as XLR panel plug, 5-pin
Connections and controls
14
Hero Beam 100
moving head