User manual

A sound controlled automatic show can only be activated when the unit is operating in stand

alone mode or as master in a master / slave combination. This setting is only relevant if the

device is not controlled via DMX.

Press [MODE] until the display shows ‘SUxx’ . This activates a sound controlled automatic show.

Now you can adjust the sensitivity of the built-in microphone for sound control. Use [UP] and

[DOWN] to select a value between 0 (low sensitivity) and 31 (high sensitivity), display shows

‘SU00’ ‘SU31’ .

Wait about 30 seconds until the display turns dark. Then the settings have been applied. To

return to the parent menu without making changes, press [MODE].

Sound control and microphone

sensitivity

Operating

Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB

LED bar