User manual
Table Of Contents
Display Meaning
‘-rb’ Red and blue
‘rgb’ Red and green and blue
‘ OFF’ LEDs o
To adjust the speed of the selected auto show, press [SETUP] repeatedly until the display indi‐
cates ‘SPxx’ . Now use [UP] and [DOWN] to select a value between ‘SP01’ (slow) and ‘SP99’
(fast) or ‘SPFL’ (ash eect).
To adjust the ash frequency, press [SETUP] repeatedly until the display shows ‘FSxx’ . Now use
[UP] and [DOWN] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast).
To adjust the fade speed of the selected auto show, press [SETUP] repeatedly until the display
shows ‘Fdxx’ . Now use [UP] and [DOWN] to select a value between ‘Fd00’ (slow) and ‘Fd99’
(fast).
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE].
Operating
34
Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB
LED bar