User manual

With ‘bAtt’ you can check the charge status of the battery.
1. Press [MODE] and use [UP] or [DOWN] to select the submenu ‘bAtt’ .
2. Conrm the selection with [SETUP].
ð
The current charge status of the battery is displayed.
With ‘Ir’ you can activate or deactivate the infrared remote control.
1. Press [MODE] and use [UP] or [DOWN] to select the submenu ‘Ir’ .
2. Conrm the selection with [SETUP].
3. Use [UP] or [DOWN] the desired option; display shows ‘on’ or ‘oFF’ .
4. Conrm the selection with [SETUP].
ð
Infrared remote control is activated or deactivated.
Battery charge display (only
item no. 472655)
Remote control
Operating
34
Giga Bar HEX 3Giga Bar HEX 3 BAT
LED Bar