User manual

Use ‘CoLo’ to select one of 32 mixed colours.
1. Press [MODE] and use [UP] or [DOWN] to select the submenu ‘CoLo’ .
2. Conrm the selection with [SETUP].
3. Use [UP] or [DOWN] to select the desired mixed colour; display shows ‘Co 1…Co 32’ .
4. Conrm the selection with [SETUP].
ð
The selected setting is accepted.
Use ‘AUto’ to select ve automatic programmes and set a running speed.
1. Press [MODE] and use [UP] or [DOWN] to select the submenu ‘AUto’ .
2. Conrm the selection with [SETUP].
3. Use [UP] or [DOWN] to select the desired auto programme; display shows ‘SH-1…SH-5’ .
4. Conrm the selection with [SETUP].
5. Use [UP] or [DOWN] to select the desired running speed; display shows ‘SP01…SP15’ .
6. Conrm the selection with [SETUP].
ð
The selected setting is accepted.
Colour selection
Operating mode Auto
Operating
Giga Bar HEX 3Giga Bar HEX 3 BAT
31
LED Bar