User manual

Use ‘Addr’ to select the start address channel for the DMX address.
1. Press [MODE] and use [UP] or [DOWN] to select the submenu ‘Addr’ .
2. Conrm the selection with [SETUP].
3. Use [UP] or [DOWN] to select the desired start address from ‘A001’ … ‘A512’ .
4. Conrm the selection with [SETUP].
ð
The selected start address is accepted.
DMX mode Highest possible start address
3-channel mode 510
4-channel mode 509
6-channel mode 507
9-channel mode 504
11-channel mode 502
Use ‘Chnd’ to select the DMX mode.
1. Press [MODE] and use [UP] or [DOWN] to select the submenu ‘Chnd’ .
2. Conrm the selection with [SETUP].
DMX address
DMX mode
Operating
Giga Bar HEX 3Giga Bar HEX 3 BAT
29
LED Bar