User manual

7 Operating
7.1 Starting the device
Connect the device to the power grid.
Turn on the power using the main switch. The display shows the current operation mode.
7.2 Operating on the unit
1. Press [MODE] to open the main menu or to return to the main menu.
2. Use [UP] or [DOWN] to select the desired submenu, parameter or value.
3. Conrm the selection with [SETUP].
ð
The selected submenu opens up or the selected value is being accepted.
To return to the next higher menu level without changes, press [MODE].
Menu control
Operating
28
Giga Bar HEX 3Giga Bar HEX 3 BAT
LED Bar