User manual

7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. The display shows the current DMX
address. The device is operational.
7.2 Main menu
Press [MENU] to activate the main menu. Use [UP]or [DOWN] to select a submenu or a value.
When the display shows the desired submenu or value, press [ENTER] to open the submenu or
to select the desired value. To close the main menu, press [MENU].
All previously made settings are retained even when you disconnect the device from the
power grid.
The following table shows the setting options.
Operating
34
Event Par IP65 4in1 14x8W, Event Par IP65 4in1 14x8W WDMX
LED PAR