User manual

A preprogrammed automatic show can only be activated when the unit is operating in stand-

alone mode or as master in a master / slave combination. This setting is only relevant if the

device is not controlled via DMX.

Press [MENU] repeatedly until the display shows ‘Auto’ . Press [ENTER]. Now you can select one

of the preprogrammed automatic shows. Use / to select a value between 0 and 59 (display

shows ‘Au 0’ … ‘Au59’ ). Press [ENTER].

To set the speed of the selected automatic show, use / to select a value between 1 (slow)

and 9 (fast) (display shows ‘SP 1’ … ‘SP 9’ ). Conrm with [ENTER].

‘Automatic mode’

Operating

Colors StarBar 12

LED bar