User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Navigating the menu
- 7.3 Operating on the unit
- 7.3.1 Setting the DMX address
- 7.3.2 Setting the DMX mode
- 7.3.3 ‘Automatic mode’
- 7.3.4 Operating mode ‘Sound control’
- 7.3.5 Master / slave mode
- 7.3.6 Setting colour macro
- 7.3.7 Setting dimmer and strobe effect for CW LEDs (WhiteBar)
- 7.3.8 Setting an individual mixed colour
- 7.3.9 Rotating the Display
- 7.3.10 Display lighting
- 7.3.11 Behaviour on DMX control failure
- 7.3.12 Dimmer curve
- 7.3.13 Key lock
- 7.3.14 Resetting the device to factory defaults
- 7.3.15 PWM (pulse width modulation)
- 7.3.16 Firmware version display
- 7.3.17 Operating hours display
- 7.3.18 LED temperature display
- 7.4 Menu overview
- 7.5 Functions in 3-channel mode
- 7.6 Functions in 6-channel mode
- 7.7 Functions in 12-channel mode
- 7.8 Functions in 16-channel mode
- 7.9 Functions in 56-channel mode
- 7.10 Functions in 68-channel mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.7 Functions in 12-channel mode
Channel LED Value Function
1 WhiteBar 000…255 Dimmer (0 % to 100 %)
2 WhiteBar Strobe
000…5 LEDs on
006…10 LEDs o (blackout)
011…33 Impulses, increasing speed
034…56 Randomly increasing brightness, increasing speed
057…79 Randomly decreasing brightness, increasing speed
080…102 Random Strobe eect, increasing speed
103…127 Burst strobe, 5 s to 1 s
128…250 Strobe eect, increasing speed, from 1 Hz to 20 Hz
251…255 LEDs on
3 WhiteBar Constant strobe pulse
000…255 Strobe impulse duration, increasing from 7 ms to 650 ms
4 Wash 000…255 Dimmer (0 % to 100 %)
5 Wash Strobe
000…5 LEDs on
006…10 LEDs o (blackout)
011…33 Impulses, increasing speed
034…56 Randomly increasing brightness, increasing speed
057…79 Randomly decreasing brightness, increasing speed
080…102 Random Strobe eect, increasing speed
103…127 Burst strobe, 5 s to 1 s
128…250 Strobe eect, increasing speed, from 1 Hz to 20 Hz
251…255 LEDs on
6 Wash 000…255 Intensity red (0 % to 100 %)
7 Wash 000…255 Intensity green (0 % to 100 %)
8 Wash 000…255 Intensity blue (0 % to 100 %)
9 Wash 000…255 Intensity white (0 % to 100 %)
10 Wash Colour macros (overwrites channel 6 to 9)
000 005 LEDs o (blackout)
006…013 Red
014…021 Amber
022…029 Warm yellow
030…037 Yellow
038…045 Green
Operating
24
Colors NerveStrobe HP
Stroboscope