User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Navigating the menu
- 7.3 Operating on the unit
- 7.3.1 Setting the DMX address
- 7.3.2 Setting the DMX mode
- 7.3.3 ‘Automatic mode’
- 7.3.4 Operating mode ‘Sound control’
- 7.3.5 Master / slave mode
- 7.3.6 Setting colour macro
- 7.3.7 Setting dimmer and strobe effect for CW LEDs (WhiteBar)
- 7.3.8 Setting an individual mixed colour
- 7.3.9 Rotating the Display
- 7.3.10 Display lighting
- 7.3.11 Behaviour on DMX control failure
- 7.3.12 Dimmer curve
- 7.3.13 Key lock
- 7.3.14 Resetting the device to factory defaults
- 7.3.15 PWM (pulse width modulation)
- 7.3.16 Firmware version display
- 7.3.17 Operating hours display
- 7.3.18 LED temperature display
- 7.4 Menu overview
- 7.5 Functions in 3-channel mode
- 7.6 Functions in 6-channel mode
- 7.7 Functions in 12-channel mode
- 7.8 Functions in 16-channel mode
- 7.9 Functions in 56-channel mode
- 7.10 Functions in 68-channel mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.4 Menu overview
DMX Address
001
512
DMX Mode
3CH
6CH
12CH
16CH
56CH
68CH
Stand Alone
Auto
Dimmer 000 - 255
Speed 000 - 100
WashMacro
Color O
Red
Amber
Yellow
Turquoise
Blue
Mauve
Pink
White
Manual
Dimmer 000 - 255
Strobe 0 - 30
Red 000 - 255
Green 000 - 255
Blue 000 - 255
White 000 - 255
WhiteBar 000 - 255
WhiteBar
Dimmer 000 - 255
Strobe 0 - 30
Program 1
Program 14
Sound
Dimmer 000 - 255
Mic Sens 00 - 99
Program 1
Program 14
Yellow warm
Green
Cyan
Lavender
Magenta
Warm White
Cold White
DMX Fail
Hold
Blackout
ManualMode PWM Rate
Linear
Exponential
Logarithmic
S-Curve
Dimmer Curve
On
O
Display Reverse
On
O
Display Backlight
On
O
AutoLock
Factory Reset
System Info
Firmware
Hours
Temp
Settings
3000Hz
6000Hz
12kHz
25kHz
Operating
20
Colors NerveStrobe HP
Stroboscope