User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Navigating the menu
- 7.3 Operating on the unit
- 7.3.1 Setting the DMX address
- 7.3.2 Setting the DMX mode
- 7.3.3 ‘Automatic mode’
- 7.3.4 Operating mode ‘Sound control’
- 7.3.5 Master / slave mode
- 7.3.6 Setting colour macro
- 7.3.7 Setting dimmer and strobe effect for CW LEDs (WhiteBar)
- 7.3.8 Setting an individual mixed colour
- 7.3.9 Rotating the Display
- 7.3.10 Display lighting
- 7.3.11 Behaviour on DMX control failure
- 7.3.12 Dimmer curve
- 7.3.13 Key lock
- 7.3.14 Resetting the device to factory defaults
- 7.3.15 PWM (pulse width modulation)
- 7.3.16 Firmware version display
- 7.3.17 Operating hours display
- 7.3.18 LED temperature display
- 7.4 Menu overview
- 7.5 Functions in 3-channel mode
- 7.6 Functions in 6-channel mode
- 7.7 Functions in 12-channel mode
- 7.8 Functions in 16-channel mode
- 7.9 Functions in 56-channel mode
- 7.10 Functions in 68-channel mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.3.15 PWM (pulse width modulation)
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘Settings’ . Conrm with .
3.
Press or repeatedly until the display shows ‘PWM Rate’ . Conrm with
4.
Use or to choose between ‘3000Hz’ , ‘6000Hz’ , ‘12kHz’ or ‘25kHz’ .
5.
Press to accept the selection.
7.3.16 Firmware version display
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘System Info’ . Conrm with .
3.
Press or repeatedly until the display shows ‘Firmware’ . Conrm with
ð
The current rmware version is displayed.
7.3.17 Operating hours display
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘System Info’ . Conrm with .
3.
Press or repeatedly until the display shows ‘Hours’ . Conrm with
ð
The operation hours of the device are displayed.
7.3.18 LED temperature display
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘System Info’ . Conrm with .
3.
Press or repeatedly until the display shows ‘Temp’ . Conrm with
ð
The current temperature of the LEDs is displayed.
Operating
Colors NerveStrobe HP
19
Stroboscope