User manual

4.
Use or to choose between ‘Hold’ (last DMX value is held), ‘Blackout’ (spot‐
light is switched o) or ‘ManualMode’ (emergency lighting is turned on) to
make the setting to be used if the DMX control fails.
5.
Press to accept the selection.
7.3.12 Dimmer curve
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘Settings’ . Conrm with .
3.
Press or repeatedly until the display shows ‘Dimmer Curve’ . Conrm with
.
4.
Use or to select the desired dimmer curve.
Display Meaning
‘Linear’ Linear course
‘Exponential’ Exponential course
(Square curve with a at prole at the beginning and a
steep prole at the end)
‘Logarithmic’ Logarithmic course
(Inverted quadratic curve with a steep course at the
beginning and a at course at the end)
‘S Curve’ S-curve shaped course
(Non-linear curve with a distinctive at course at the
beginning and end)
5.
Press to accept the selection.
7.3.13 Key lock
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘Settings’ . Conrm with .
3.
Press or repeatedly until the display shows ‘AutoLock’ . Conrm with .
4.
Use or to choose between ‘On’ (keylock on) and ‘O’ (keylock o).
5.
Press to accept the selection.
6.
Simultaneously press and for 5 seconds if you want to activate the input
while the keylock is activated.
7.3.14 Resetting the device to factory defaults
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘Settings’ . Conrm with .
3.
Press or repeatedly until the display shows ‘Factory Reset’ .
ð
The display shows the message ‘Reset Now’ .
4.
Press to reset the device to factory default setting.
Operating
18
Colors NerveStrobe HP
Stroboscope