User manual

5.
Press or to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 4 Menu level 5 Description
‘Dimmer’ ‘000…255’ Dimmer intensity
‘Mic Sens’ ‘00…99’ Microphone sensitivity from low to high
6.
Press to accept the selection.
7.3.5 Master / slave mode
To use a device as the master device, select the auto mode, activate the sound con‐
trol or the manual control. Connect the slave devices to the DMX output of the
master device and select the DMX mode.
7.3.6 Setting colour macro
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘Stand Alone’ . Conrm with .
3.
Press or repeatedly until the display shows ‘WashMacro’ . Conrm with .
4.
Use or to select one of the 15 colour macros ( ‘Red’ … ‘Cold White’ ) or turn
the colour o ( ‘Color O’ ). Conrm with .
5.
Press or to select the desired value for the intensity of the colour macro.
The following colour macros are available:
‘Color O’ ‘Yellow’ ‘Blue’ ‘Pink’
‘Red’ ‘Green’ ‘Lavender’ ‘Warm White’
‘Amber’ ‘Turquoise’ ‘Mauve’ ‘White’
‘Yellow warm’ ‘Cyan’ ‘Magenta’ ‘Cold White’
6.
Press to accept the selection.
7.3.7 Setting dimmer and strobe eect for CW LEDs (WhiteBar)
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘Stand Alone’ . Conrm with .
3.
Press or repeatedly until the display shows ‘WhiteBar’ . Conrm with .
4.
Press or to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘Dimmer’ ‘000…255’ Dimmer intensity
‘Strobe’ ‘AC 0 … 30Hz’ Strobe eect frequency from slow to fast
5.
Press to accept the selection.
Operating
16
Colors NerveStrobe HP
Stroboscope