User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Navigating the menu
- 7.3 Operating on the unit
- 7.3.1 Setting the DMX address
- 7.3.2 Setting the DMX mode
- 7.3.3 ‘Automatic mode’
- 7.3.4 Operating mode ‘Sound control’
- 7.3.5 Master / slave mode
- 7.3.6 Setting colour macro
- 7.3.7 Setting dimmer and strobe effect for CW LEDs (WhiteBar)
- 7.3.8 Setting an individual mixed colour
- 7.3.9 Rotating the Display
- 7.3.10 Display lighting
- 7.3.11 Behaviour on DMX control failure
- 7.3.12 Dimmer curve
- 7.3.13 Key lock
- 7.3.14 Resetting the device to factory defaults
- 7.3.15 PWM (pulse width modulation)
- 7.3.16 Firmware version display
- 7.3.17 Operating hours display
- 7.3.18 LED temperature display
- 7.4 Menu overview
- 7.5 Functions in 3-channel mode
- 7.6 Functions in 6-channel mode
- 7.7 Functions in 12-channel mode
- 7.8 Functions in 16-channel mode
- 7.9 Functions in 56-channel mode
- 7.10 Functions in 68-channel mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7 Operating
7.1 Starting the device
1. Connect the device to the power supply to start operation.
2. The display shows the start screen with the last set operating parameters. The
device is operational.
7.2 Navigating the menu
1.
Press to activate the main menu.
2.
Press or to select a submenu.
3.
To activate the respectively shown menu item, press .
4.
Press or to change the respectively indicated value.
5.
Press to apply the displayed value.
6.
Press to return to the parent menu level.
The set values are retained even when the device is disconnected from the mains
power supply.
7.3 Operating on the unit
7.3.1 Setting the DMX address
1.
Press to activate the main menu.
2.
Press or repeatedly until the display shows ‘DMX Address’ . Conrm with .
3.
Use or to select a DMX address in the range of ‘001’ … ‘512’ . Conrm with
.
This setting is only relevant when the device is controlled via DMX. Make sure that
this number matches the conguration of your DMX controller. The following table
shows the highest possible DMX address for the various DMX modes.
Mode Display Highest possible DMX address
3-channel ‘3CH’ 510
6-channel ‘6CH’ 507
12-channel ‘12CH’ 501
16-channel ‘16CH’ 497
56-channel ‘56CH’ 457
68-channel ‘68CH’ 445
The RGBW LEDs are divided into 12 segments in 16, 56 and 68 channel DMX modes.
Operating
14
Colors NerveStrobe HP
Stroboscope