User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Navigating the menu
- 7.3 Operating on the unit
- 7.3.1 Setting the DMX address
- 7.3.2 Setting the DMX mode
- 7.3.3 ‘Automatic mode’
- 7.3.4 Operating mode ‘Sound control’
- 7.3.5 Master / slave mode
- 7.3.6 Setting colour macro
- 7.3.7 Setting dimmer and strobe effect for CW LEDs (WhiteBar)
- 7.3.8 Setting an individual mixed colour
- 7.3.9 Rotating the Display
- 7.3.10 Display lighting
- 7.3.11 Behaviour on DMX control failure
- 7.3.12 Dimmer curve
- 7.3.13 Key lock
- 7.3.14 Resetting the device to factory defaults
- 7.3.15 PWM (pulse width modulation)
- 7.3.16 Firmware version display
- 7.3.17 Operating hours display
- 7.3.18 LED temperature display
- 7.4 Menu overview
- 7.5 Functions in 3-channel mode
- 7.6 Functions in 6-channel mode
- 7.7 Functions in 12-channel mode
- 7.8 Functions in 16-channel mode
- 7.9 Functions in 56-channel mode
- 7.10 Functions in 68-channel mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
POWER IN POWER OUT F2AL250V
100-240V~50/60Hz Power Consumption: 250W
DMX IN DMX OUT DMX IN DMX OUT
& ' * + , -( )
.
5 [POWER IN]
Lockable input socket (Power Twist) for powering the device
6 [POWER OUT]
Lockable output socket (Power Twist) for powering further devices
7 [F2AL250V]
Fuse
8 Safety eye for attaching the safety cable
9 [DMX IN]
DMX input, 3-pin
10 [DMX OUT]
DMX output, 3-pin
11 [DMX IN]
DMX input, 5-pin
12 [DMX OUT]
DMX output, 5-pin
13 Display
Activates the main menu and toggles between menu items
Increases the displayed value by one
Decreases the displayed value by one
Selects an option of the respective operating mode
Rear side and connection panel
Connections and operating elements
Colors NerveStrobe HP
13
Stroboscope