User manual

7 Operating

7.1 Starting the device

Reconnect the device to the mains if needed. Switch the unit on with the main switch to start

operation. After a few seconds, the display indicates that a reset is in progress. The device is

then ready for use. The display shows the operating mode that was selected when the unit was

last powered o.

7.2 Main menu

Press [ENTER] to activate the main menu. Use [UP] or [DOWN] to select a submenu. When the

display shows the desired submenu press [ENTER] to open it up. To close the main menu, press

[MODE].

The following table shows the setting options.

Operating

Battery Event Par IP65 6in1

LED spotlight