User manual

Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Soun’ . Conrm with [ENTER].
Use [UP] and [DOWN] to select the desired mode ‘Sou1’ or ‘Sou2’ . Conrm with [ENTER].
Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Colo’ . Conrm with [ENTER].
Use [UP] and [DOWN] to select a constant colour in a range from ‘Col1’ … ‘Col9’ or the option
‘AtF’ . Conrm with [ENTER]
In AtF mode, you can create custom colour mixes by adjusting the red, green, blue, and white
colour intensities in a range from ‘1’ … ‘255’ . Conrm each colour setting with [ENTER] to
change to the next colour in the menu.
Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Auto’ . Conrm with [ENTER].
Use [UP] and [DOWN] to select the desired mode ‘Aut1’ or ‘Aut2’ . Conrm with [ENTER]. You
can now set the program's speed between ‘SP 1’ and ‘SP 9’ .
Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘SLav’ . Conrm with [ENTER].
The display shows ‘Sla’ , the unit is now in Slave mode.
Sound control
Constant colour
Operating mode Auto
Operating mode Slave
Operating
BAT.Trusslight RGBW
33
LED spotlight