User manual

7 Operating
7.1 Starting the device
Using the main switch, turn the device on. The display shows the current operation mode.
7.2 Operating controls on the unit
Wait for approx. 15 seconds after conrming the last modication of the setting until the dis‐
play turns o. Now the settings are saved.
Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Addr’ . Conrm with [ENTER].
Now you can set the number of the rst DMX channel to be used by the device (DMX address).
Use [UP] and [DOWN] to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ).
Conrm with [ENTER].
DMX mode, DMX address
Operating
32
BAT.Trusslight RGBW
LED spotlight