Safety data sheet

Penetrating-Oil
Safety Data Sheet
Product code: VB_71
Print date: 01.06.2015 Page 5 of 9
ITW LLC & Co. KG
according to Regulation (EC) No 1907/2006
Biological Monitoring Guidance Values (EH40)
Sampling timeParameter Value Test materialSubstanceCAS No
111-76-2 2-Butoxyethanol urine
240
mmol/mol
Post shiftbutoxyacetic acid
No data available
Additional advice on limit values
8.2. Exposure controls
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe
gas/fumes/vapour/spray.
Appropriate engineering controls
Change contaminated clothing. Wash hands before breaks and after work. When using do not eat or
drink.
Protective and hygiene measures
Tightly sealed safety glasses.
Eye/face protection
DIN EN 374 Tested protective gloves are to be worn: Butyl rubber. For special purposes, it is
recommended to check the resistance to chemicals of the protective gloves mentioned above together
with the supplier of these gloves.
Hand protection
Protective clothing:
Skin protection
In case of inadequate ventilation wear respiratory protection.
Respiratory protection
No data available
Environmental exposure controls
colourless
Aerosol
Physical state:
Colour:
9.1. Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
characteristic
Odour:
Test method
Changes in the physical state
-0,5 °C
Initial boiling point and boiling range:
< 0 °CFlash point:
Lower explosion limits:
Upper explosion limits:
0,703 g/cm³Density:
SECTION 10: Stability and reactivity
Revision No: 1,10 Revision date: 12.03.2015 GB - EN