Solutions for Demanding Applications VarTech Systems Inc. Industrial CRT and Flat Panel Displays VT201CHC . VT201CHC-IR 20.1” Honeywell Configured Flat Panel User’s Guide Read these instructions completely before attempting to operate your new Color Display.
Table Of Contents Section Page Section Section 1 Section 4 Introduction Touch screen 1.1 VT201CHC Display Family 1 1.2 Product Safety Precautions 2 4.1 Touch Screen Introduction Page 10 Section 5 Section 2 Troubleshooting Tips 11 Display Setup 2.1 Display Features 3 Section 6 2.2 Unpacking The Display 4 Cleaning & Maintenance 2.3 Included Parts 4 2.4 Connecting Your Display 4 2.
Section 1 1.1 INTRODUCTION VT201CHC Display Family The VT201CHC is part of a series of LCD replacement displays for the Honeywell "Z" Style replacement furniture. The VT201CHC display is an upgrade solution for US and UxS based systems. The VT201CHC is compatible with EPDG, EPDG2, and TPDG video. The VT201CHC-IR is a complete upgrade solution.
1.2 Product Safety Precautions ⇒ Ensure that sufficient space is available around the display to provide the circulation necessary for cooling. ⇒ Ensure that the ambient air temperature will not exceed the specified maximum temperature. ⇒ Do not attempt to service this display yourself. The rear chassis has a seal so that non qualified personal will not expose themselves to dangerous voltages or other risks.
Section DISPLAY SETUP 2 2.1 VT201CHC Display Features ⇒ Capable of displaying unlimited colors in a continuous spectrum. The high contrast LCD enhances the image with no geometric distortion. ⇒ The VT201CHC comes with a HD15 Input Connector. The VT201CHC also includes an HD15 to DB9 Video Adapter Cable. ⇒ The VT201CHC is supplied with a remote membrane switch assembly that mounts to the front of the console bezel for OSD controls. ⇒ The VT201CHC is supplied with an Anti-Reflective Screen.
2.2 Unpacking and setting up your display Your LCD monitor package will consist of the basic components listed below. Depending on the display configuration, additional components are supplied. 2.3 What is included with your display 20.1” LCD Monitor Video adapter cable (HD15 to DB9) Accessory Kit: OSD Membrane Kit; Chassis Brackets; Power Cord; a HD15 to DB9 Video Adapter Cable. ⇒ Users Guide (Printed or on CD) ⇒ ⇒ ⇒ 2.4 Connecting the Display 1. Connect all cables to the station first.
2.5 Signal Connections Cont. Use the HD15 to DB9 video adapter cable to connect the flat panel display to the EPDG I/O adapter board for EPDG and EPDG2 video. The HD15 to 5xBNC video adapter cable is supplied for non-standard configurations. Note: The following figure is the view looking into the pin end of the male connector or solder term end of the female connector. HD15 Connector The following table provides the pin numbers and corresponding pin assignments for the HD-15 video connector.
Section GETTING STARTED 3 3.
3.3 User Controls Direct Brightness Adjustment OSD Agent Description Brightness Controls the intensity of the backlight. After adjustment, the new Brightness value is displayed on the screen until the OSD timeout period expires. The new setting is then stored and the display returns to normal. Direct Contrast Adjustment OSD Agent Contrast Description Controls the contrast (video gain) of the picture.
3.3 Adjustment Procedure Cont. The Geometry Menu OSD Agent Edge Adjustment Description Adjusts Picture Size and Position Controls. The four “Edge” controls shift each edge within available limits. Note that the maximum available shift depends on the incoming video standard and the display panel type, and may be restricted vertically. This provides very flexible and easy to use image size an position control.
3.3 Adjustment Procedure Cont. The System Menu: Contains functions which are more applicable to system operation than to picture adjustment. OSD Agent Description Esc Returns to the last saved setup. It is useful if an adjustment has been made in error. Save Saves all the user adjustments for the displayed signal type. The new adjustments are stored in non-volatile memory and so are still valid from a power down—power up cycle.
Section 4 4.1 TOUCH SCREEN Touch Screen Introduction The VT201CHC-IR is supplied with a new flat IR touch frame which is compatible with the original monitor IR touch frame. Connect the DB9 cable connector of the original IR touch interface cable to the DB9 connector on the new IR touch frame. It will be necessary to reboot the system for the new touch frame to be activated.
Section 5 TROUBLESHOOTING Troubleshooting Tips Problem Troubleshooting Tip No image on display screen 1. Check that the power cord of the station has been connected to the display. 2. Check that the power switch of the Display has been turned to the on position. 3. Check that the Video (Signal) Cable from the Display has been securely and correctly connected to the I/O adapter board. 4. Check that the Video Card and the I/O adapter card are firmly seated in the card slots of the stations.
Section 6 CLEANING AND MAINTANENCE Cleaning Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit. Note: The solvent should be applied only to the cloth, and not directly on the monitor screen. Do not use paper products as they may scratch the surface. To minimize the risk of abrasion, allow the screen to stand dry.
Section 7 MOUNTING INSTRUCTIONS Mechanical Drawings Model Description VT201CHC Display only with original IR touch 14-15 VT201CHC-IR Display and replacement IR touch 16-17 7.1 Page(s) Mounting Procedure - VT201CHC 1. 2. 3. 4. 5. 6. 7. Remove the rear plastic console cabinet. Disconnect the video cable, touch interface cable and power cord. Remove the 4-6 screws that secure the display side mounting brackets. Remove the CRT Display Remove the original front plastic console bezel.
14
TOUCH OUTPUT AC INPUT 100-220 VAC 50/60 Hz 0.75A FAN TO HAVE 1.
VarTech Systems 16
TOUCH OUTPUT AC INPUT 100-220 VAC 50/60 Hz 0.75A FAN TO HAVE 1.
Section 8 SPECIFICATIONS ENGINEERING SPECIFICATIONS Panel Size 20.1” Type TFT Bright Active matrix AR / AG Protective Faceplate Resolution Capabilities EPDG, EPDG2, TPDG Pixel Pitch 0.3075mm Active Display Area 16.21” x 12.20” 411.7mm x 309.8mm Viewing Angle (Left/Right) 80/80º Viewing Angle (Up/Down) 80/80º Contrast Ratio 350:1 Brightness 250 Nits Response Time TR = 12ms typical TF = 13ms typical Back Lights Cold Cathode 50,000 Hrs.
VARTECH SYSTEMS HEADQUARTERS 11529 Sun Belt Ct. Baton Rouge, Louisiana 70809 Toll-Free: 800.223.8050 International Phone: 001.225.298.0300 Fax: 225.297.2440 E-mail: sales@vartechsystems.com www.vartechsystems.com 150-060-001 12.28.
