User`s guide

2.4
Signal Connections Cont.
Pin assignments for the HD15 video connector.
Pin 1 Red Video Pin 9 No Connection
Pin 2 Green Video Pin 10 Sync Ground
Pin 3 Blue Video Pin 11 Not Used
Pin 4 Not Used Pin 12 Bi-Directional Data
Pin 5 Return Pin 13 Horizontal Sync
Pin 6 Red Video Ground Pin 14 Vertical Sync
Pin 7 Green Video Ground Pin 15 Data Clock (SCL)
Pin 8 Blue Video Ground
Standard Resolutions Supported
⇒ 640 x 480 (VGA)
⇒ 800 x 600 (SVGA)
⇒ 1024 x 768 (XGA)
⇒ 1280 x 1024 (SXGA)
Pin assignment for 9 Pin Optional Touch Screen Connector.
Pin 1 DCD Data Carrier Detect
Pin 2 RD (Rx) Receive Data
Pin 3 SD (Tx) Transmit Data
Pin 4 DTR Data Terminal Ready
Pin 5 SB Signal Ground
Pin 6 DSR Data Set Ready
Pin 7 RTS Request to Send
Pin 8 CTS Clear to Send
Pin 9 NC No Connection
You can use an HD-15 connector cable or a BNC adapter cable to connect the flat panel monitor
to the host computer. The HD-15 video cable (supplied in the kit) you use with this monitor is
equipped with a conventional HD-15 connector at each end.
Note: The following figure is the view looking into the pin end of the male connector or solder
term end of the female connector.
HD-15 Video Connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector.
5