User`s guide

GETTING STARTED
3
Section
3.1
Operator Controls and Indicators
Operator controls include a power switch (an option), a button panel for accessing the setup
menus (OSD), and a luminance control. The VT170 Military / Marine Series monitors have
an LED to indicate power on. Figure 2 show a drawing of the VT170RM to illustrate the layout.
• The power switch controls main power to the monitor. Power on is indicated by an
LED next to the switch.
• The OSD controls are discussed in detail in a following section.
• The luminance control controls the backlight. The range of the control is determined
by the brightness setting made with the OSD.
8
The monitor is pre-aligned at the factory. However, minor adjustments are usually necessary
following installation to optimize the monitor’s performance with a particular video source and
particular video formats. This section of the manual describes the operator accessible controls that
allow for such adjustment. It goes on to describe a typical setup procedure.
P
O
WE
R
ON
LEF
T
SOU
R
C
E D
O
WNMEN
U
U
P
BRI
G
HTNE
SS
AU
T
O
RI
G
H
T
Power
Switch
Power on
indicator
OSD
Controls
Luminance
Control
Figure 2 – VT181RM front view, showing operator controls