User`s guide

7
VT150 High Bright User Guide 150-085
Operating the Monitor
Getting Started
3
Section
3.1
Users can adjust the picture to the desired brightness and sharpness by following these
instructions. The adjustment buttons utilize a security feature that required the use of a paper
clip or pin to activate each selection. This is accomplished through pinholes in each button
except the power on/off.
1 Power Switch Power On/Off
2 Auto
Automatically optimize positions, phase & clock when OSD is not
shown
3 Exit / Exit the OSD menu when OSD is shown
4
＋ /
Selection or adjustment when OSD is shown/Quick brightness ad-
justment
5
－ /
Adjustment when OSD is shown/Quick contrast adjustment
6 Menu Enter OSD/Access sub-menu & selection
Adjusting the Viewing Angle (VT150DHB)
Your LCD Monitor is designed to allow you to adjust to an optimal viewing angle.
The tilt mechanism has a locking knob on the rear of the display portion of the Touch Monitor.
There is a legend on the lock to indicate the locked or unlocked position of the locking knob.
Do not force the display to tilt without unlocking the mechanism first.
3.2