Solutions for Demanding Applications VarTech Systems Inc. Industrial Flat Panel Displays VT150 DiamondVue/CrystalVue Series 15.
Read these instructions completely before attempting to operate your new LCD Color Display. Table Of Contents Page Section 1 Page Section 4 Introduction 3 Touch screen 10 1.1 VT150 Series Features 3 4.1 Touch Screen Introduction 10 1.2 Product Safety Precautions 3 4.2 Touch Screen Installation 10 Section 2 Section 5 Display Setup 4 2.1 Inspection 4 2.2 Unpacking 4 Section 6 2.3 Included Parts 4 6.1 Cleaning & Maintenance 2.4 Connecting The Display 4 2.
INTRODUCTION SECTION 1 1.1 VT150 Series Features The VT150 Series is capable of displaying 16.8M colors in a continuous spectrum. The VT150 Series provides a standard VGA input, a DVI-D input, an S-Video input, and a Composite input. The VT150 Series is auto synchronous adjusting the display to the appropriate VGA input. The VT150 Series is available in Chassis Mount, Panel Mount, Wall Mount, and Rack Mount configurations.
DISPLAY SETUP SECTION 2 2.1 Inspection of your VT150 display The VT150 is supplied with different accessories depending on the model configuration purchased. Verify the VT150 and accessories are what were ordered. Contact your Vartech salesperson should there be any discrepancies. 2.2 Unpacking and setting up your VT150 display Your LCD monitor package will consist of the components listed below. Open shipping container and place all the components on a flat clean surface. 2.
2.5 Input Video Connections The VT150 Series provides four industry standard video inputs: Analog RGB (VGA) with auto detect of Digital Separate Sync, Sync-On-Green, and Composite Sync. Auto detects from VGA to UXGA, interlaced and non-interlaced video. DVI-D with auto detect of Digital Separate Sync. S-Video for 4 wire video Composite for NTSC, PAL, and SECAM video (interlaced) Optional BNC Adaptor Cable A HD15 (VGA)-to-5xBNC adapter cable is available. The functions of the cables are described below.
GETTING STARTED SECTION 3 3.
3.
Exit Exit the OSD menu and save the settings Brightness and Contrast Brightness Contrast Saturation* Hue* Exit Increase/decrease brightness level. Press – or + (Increase/decrease panel contrast level. Press – or + (Increase/decrease hue level.
Utilities OSD setting Load Factory Default Sharpness Exit OSD Timeout : 0 / 10 / 20 / 30 / 40 / 50 / 60 seconds (Always on when set to 0) Press – or + (+) OSD menu horizontal position Press – or + (+) OSD menu vertical position Press – or + (+) Initialize the setting stored in non-volatile memory Adjust sharpness level Press – or + (Exit the OSD menu + ) Total : 49 steps Exit the OSD menu * - Function in Video mode only # - Function in ARGB mode only Items marked have sub menus.
TOUCHSCREEN SECTION 4 4.1 Introduction Touch screens are a common means to interface operator inputs to a system. The universal standard of Windows GUI (Graphical User Interface) has significantly increased the use of touch screens. There are five main touch technologies. The technologies are resistive, surface acoustic wave (SAW), capacitive, infrared (IR), and projective capacitive. Each touch technology has advantages and disadvantages based on different user applications. 4.
TROUBLESHOOTING SECTION 5 5.
MAINTENANCE SECTION 6 6.1 Cleaning Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit. Note: The solvent should be applied only to the cloth, and not directly on the monitor screen. Do not use paper products as they may scratch the surface. To minimize the risk of abrasion, allow the screen to stand dry.
MOUNTING INSTRUCTIONS SECTION 7 7.1 Panel Mount Procedure Mechanical Drawings Model Description VT150P2 15.0" DiamondVue/CrystalVue Panel Mount Drawing (Nema 4) VT150PS2 15.0" DiamondVue/CrystalVue Drawing (Nema 4x) VT150R2 15.0" DiamondVue/CrystalVue Rack Mount Drawing VT150C2 15.0" DiamondVue/CrystalVue Openframe VT150W2 15.0" DiamondVue/CrystalVue Wall Mount Page(s) 16 17 18 19 20 1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches. 2.
SPECIFICATIONS ENGINEERING SPECIFICATIONS – DiamondVue Panel Size 15.0” (38cm) Type Active Matrix Color Thin Film Transistor (TFT) Native Panel Resolution XGA Pixel Format 1024 (H) x 768 (V) Pixel Pitch 0.297 (H) x 0.297 (V) mm Pixel Arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe Dot Pitch 0.099 (H) x 0.297 (V) mm Active Display Area 11.974” x 8.980” 304.128mm x 228.096mm Viewing Angle (Left/Right) 80/80 (typ.) Viewing Angle (Up/Down) 80/80 (typ.) Color Gamut 50% (typ.
SPECIFICATIONS ENGINEERING SPECIFICATIONS – CrystalVue Panel Size 15.0” (38cm) Type Active Matrix Color Thin Film Transistor (TFT) Native Panel Resolution XGA Pixel Format 1024 (H) x 768 (V) Pixel Pitch 0.297 (H) x 0.297 (V) mm Pixel Arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe Dot Pitch 0.099 (H) x 0.297 (V) mm Active Display Area 11.974” x 8.980” 304.128mm x 228.096mm Viewing Angle (Left/Right) 80/80 (typ.) Viewing Angle (Up/Down) 80/60 (typ.) Color Gamut 40% (typ.
VT150 DiamondVue/CrystalVue User’s Guide 150-178
VT150 DiamondVue/CrystalVue User’s Guide 150-178
VT150 DiamondVue/CrystalVue User’s Guide 150-178
VT150 DiamondVue/CrystalVue User’s Guide 150-178
VARTECH SYSTEMS INC. HEADQUARTERS 6399 Amp Drive, Clemmons, NC 27012 Toll-Free: 800.223.8050 International Phone: 001.225.298.0300 Fax: 225.297.2440 E-mail: sales@vartechsystems.com www.vartechsystems.com 01.06.
