User`s guide

DIGITAL CONTROLS

The digital controls are located on the rear side of the monitor.

Normal Mode Controls

Operates the functions when the LED power is on continuously.

Function Mode Controls

Operates the functions when the LED is flashing.

∗ Press Function button.LED will blink allowing for keystone,

store program and pincushion adjustments.

-5-

LED

Function

Switch

Brightness

Press “-” to decrease

Press “+” to increase

Contrast

Press “-” to decrease

Press “+” to increase

Program Store*

Press to save picture alignment.

(Also returns monitor to normal

mode)

Horizontal Position

Press “-” to move picture left

Press “+” to move picture right

Vertical Position

Press “-” to move picture down

Press “+” to move picture up

Keystone*

Press “-” or “+” to make sides of

picture parallel

Horizontal Size

Press “-” to decrease size

Press “+” to increase size

Vertical Size

Press “-” to decrease size

Press “+” to increase size

Pincushion*

Press to adjust curvature of

picture sides

Function Key

Press to switch between

normal mode (LED will stop flashing) and

function mode (LED will start flashing).

DIGITAL CONTROLS

Section