User`s guide

VT121 DiamondVue Series User Guide 150-001
Adjusting the display
GETTING STARTED
GETTING STARTED
3
Section
Definition of OSD (on screen display) Adjustments
There are four membrane buttons (as shown above) located on the rear of the unit. They will
activate the OSD and allow navigation to all adjustments if your unit requires adjustment.
OSD Layout
Main Menu Sub Adjustment
Automatic Adjust Geometry & Color Balance
Horizontal Position Horizontal position
Vertical Position Vertical Position
Horizontal Size Horizontal Size
Phase Phase
Brightness Brightness
Contrast Contrast
Color Red, Green, Blue
OSD Language English, Espanol, Deutsch, Francais, Italiano
Advanced Factory Preset, OSD Hor. Pos., OSD Vert. Pos.
Cancel
The VT121 Series display has an embedded microprocessor in the converter card. Once you
have the unit displaying the resolution you desire for your application do the following:
In order to navigate to the appropriate adjustments, press Menu and the OSD layout chart
will appear as indicated in Fig. 1 from left to right.
If you press the “MENU” the new settings are saved and the OSM appear and your setting
will be stored in the unit’s non volatile memory.
Select Menu
Vartech Systems
www.vartechsystems.com
3.1
7