User`s guide

VT121 ColorVue Series User Guide 150-033

OSD Functions

Symbol Description Function

RESOLUTION

Display the picture model.

AUTOTUNE &

RECALL

Autotune the parameters or Recall the factory setting of this mode.

EXIT

Press LEFT key will EXIT and not save the parameters you adjust.

Press RIGHT key will exit an save the parameters and adjust.

BRIGHTNESS

Setup the brightness of the panel.

CONTRAST

Setup the contrast of the panel, maybe need fine tune after

auto-tune section (8-3)

8.2 OSD Adjusting and Controls

Note:

If the monitor can’t work normally by using incorrect ways, please turn off the monitor.

First keep pressing RIGHT key, then turn on the monitor till the frame appears.

Note:

If you don’t press any key during 15 seconds, the OSD will disappear by itself and not save the

parameters.