Datasheet

1.2 GENERAL DESIGN AND APPLICATION CRITERIA
The choice of the most suitable cells or battery types
is exclusively related to the type of application and the
operating conditions.
The relevant cell data can be found in the corresponding
sections of this catalogue. The data comprises standard
values for planning purposes. As such they describe the
performance for each cell type and always refer to single
cells.
For the assembly of batteries we will assist you with all
our long experience and expertise.
Standard battery assemblies up to 10 cells (12 V nomi-
nal voltage) are available.
Assemblies with higher numbers of cells are possible
under certain application conditions. Ask us – we will
advise you.
For further orientation and planning, please find a check
list on page 51 of this handbook.
The most important criteria for selection are
as follows:
■
Type of operation of the cell, i.e. cyclic operation
(continuous sequence of charge/discharge) or standby
operation, trickle charged
■
Available space
■
Maximum weight
■
Temperature during use
■
Duration and level of load (continuous pulsed)
■
Operating voltage required with voltage limiting values
■
Charging conditions
page 6 | 7