Operating instructions

POWXG9007

P a g e | 13

www.varo.com

When the engine has been successfully started

and is running smoothly return the choke lever

(picture 2, part 19) to the OFF position

When the engine is running, the speed can be

adjusted by moving the throttle control lever

(picture2, part 18). When you slide the throttle to

the right, the engine will have a lower rotation

speed. To obtain a higher rotation speed you have

to slide the throttle more to the left.

11.4 Stop the engine

To stop the engine, turn the engine ON/OFF

switch (picture 3, part 26) to the OFF position.

Warning! After the engine has stopped turn off the water supply to the pressure washer and

release all remaining pressure by operating the trigger until there is no more pressure in the

appliance and the water flow stops, secure the trigger with the safety lock (picture1, part 5) to

prevent unintentional operation.

Disconnect the lance and drain any residual water from all hoses (picture 1, part 3), carefully

coil the hoses ensuring that they are not kinked or twisted and check for any other damage,

replace any damaged hoses. Damaged hoses can be dangerous under pressure.

When the engine has stopped and before storage,

turn the fuel lever (picture 2, part 20) to the OFF

position